Performance You Can Trust
Dandy Sack, Framed Model, is made of high-quality, domestically-sourced raw materials that enhance performance. The safety orange monofilament geotextile always looks new, no matter how many times you reuse the product. The suspended solids settle out of the slowed flow and are reliably captured by the Dandy Sack prior to entering the inlet.
Made in the USA
Like all of our products, the Dandy Sack, Framed Model, is made at our manufacturing facility in Ohio. It’s always in stock and can typically be shipped in 24 hours. If you need a custom size, we’ll make it for you and ship it within 5 days for rapid receipt. Because we only use U.S. vendors, do our own manufacturing and have a large distribution network, you get your products quickly.
Step 1
Remove the grate from the catch basin.
Step 2
If using optional oil absorbents, place the absorbent sheet on the bottom of the unit.
Step 3
Stand the grate on end.
Step 4
Clean any dirt and debris from inlet ledge.
Step 5
Position the Dandy Sack, Framed Model on the lip of the inlet.
Step 6
Reinstall the grate. For added effectiveness, Dandy Sack, Framed Model should be secured between grating and inlet lip.
Performing the necessary maintenance will keep Dandy Sack, Framed Model working at an optimal level:
- Remove all accumulated sediment and debris from the vicinity of the unit after each storm event.
- After a storm event and at regular intervals, look into the Dandy Sack. If the containment area is more than 1/3 full of sediment, empty the unit.
- To empty the unit, simply lift the unit using lifting straps and remove the grate.
- If using optional oil absorbents, replace the absorbent sheet when it nears saturation.
- Dispose of unit in accordance with applicable federal, state and local environmental laws and regulations. The user is solely responsible for compliance with maintenance and disposal laws. Dandy Products or seller assume no responsibility for proper and improper maintenance and disposal.
